Automatic AGM Enveloping&stacking Machine For Motorcycle Batteries

User set the number of positive plates and negative plates, Set the length of AGM separator. The machine automatically feeds plate and AGM, automatically folds AGM and envelopes plate, The positive and negative plates and lugs are alternately packed into a group.

Application:

Apply to enveloping plates for 2V VRLA batteries, Such as 2V200Ah,400Ah etc…

Functional characteristics:

Ø  PLC control system, touchable the man-machine interface, The machine and the Film packing machine are controlled independently and combined organically.

Ø  Double feeding racks, feeding motor worked automatically according to the detection of photoelectric signal, automatic feeding.

Ø  Set the length of AGM follow plate’s size, the machine Automatic measuring AGM’s length and automatic cutting.

Ø  The AGM compression ratio can be adjusted, The cutting position can be adjusted up and down, and the center line of the AGM can be adjusted.

Ø  According to the size of the plate, the width of the horizontal transfer track can be adjusted; According to the width of the AGM, the width of the AGM transfer track can be adjusted; Model change can be completed within 15 minutes, especially suitable for multi-specification battery enveloping plate in one machine.

Ø  Positive and negative plate adopts parallel feeding, feeding balance, stability, neat, lack of plate alarm.

Ø  Set the number of positive plates and negative plates freely, Such as 2+/2- ,3+/4-.......7+/8- etc…; The plate group conveying adopts the non-slip chain transmission with fill group alarm on the conveyor.

Ø  Longitudinal and transverse rectifying devices are installed in the channels of the machine, It ensures that plate groups are neat; The machine has the function of plate group automatic move group.

Ø  Fully closed design, exhaust system in the lower part of the machine, Can better to collecting lead dust and effective protection electronic components.

Ø  The machine is equipped with automatic alarm security system, and meet safety gate was opened,the machine automatic stop.

Ø  The equipment is equipped with centrifugal pump suction plate system with dust filter, It can be removed and cleaned; The machine has suction plate detection function.

Ø  The machine is equipped with automatic alarm security system, and meet the alarm, will automatically alert, and automatic stop immediately and display the alarm information on the man-machine interface; The machine is equipped with functional button switches such as start, stop and reset etc….

Ø  The machine is equipped with automatic mode and Manual mode etc…

Ø  The machine can automatically record the effective working time, failure time, failure times and qty.

Ø  Users can choose left - out models or right - out models according to the production line.

Technical parameters:

Ø  Input:3 phase 380Vac /50Hz

Ø  Air Supply:0.6~0.8MPa

Ø  Power: ≦4.5KW

Ø  Efficiency: more than 90%

Ø  Separator: AGM

Ø  Capacity:2V200Ah  11+/12-  800PCS/8h

Ø  Rejection rate:≦5‰（Plate don't has deformation, holes, cracks, model change and equipment not normal maintenance except）

Specification:

Layout Draw：